Description: Lower Power Single Solenoid Valve
The SE Series Lower Power Solenoid Valve features low power consumption and low current operations which allows direct drive by a programmable controller (PC) output circuit and enables the use of a simple compact control circuit. Low power operation means there is little heat generated from the coil, which minimizes the effects of heat on mechanisms. Even with the AC solenoid there is little chance for coil burnout. The M12-4 pin connector option make it easier to interface with open networks (e.g.,Device Net) and streamline wiring work. The diode for preventing current back surge is built in the terminal box to protect slave unit connection. This valve meets overseas safety standards TÜV (CE Marking) and can be used worldwide.
Note: Auxiliary Symbols
GR: Surgeless Type with Indicator Light (Applicable for Power Supply D2 only)
R: Indicator Light (Applicable for Power Supply E1 only)
V: With M12-4 Pin Connector, Load Side - Common (Applicable for Power Supply D2 only)
W: With M12-4 Pin Connector, Load Side + Common (Applicable for Power Supply D2 only)
|Mount||G: Gasket Type|
|Nominal Pipe Diameter||03|
|Operation Method||E: Detent|
|Center Valve Position Flow Path||3|
|Transition Flow Path||None|
|Auxiliary Symbols||GR: Surgeless Type with Indicator Light|
|Power Supply||D2: DC 24V|
|Design Number||J30: M6 Mounting Bolts (03 Size)|
|Weight (lb/kg)||7.3 / 3.3|
Values provided may differ based on other specifications. Please consult the product documentation for values specific to the model number.
*Please consult product documentation for specific values
Looking for distributors outside of the US? Find Mexican Distributors or Canadian Distributors
- For mounting bolts, use bolts of 12.9 strength classification or equivalent.